background image

44

EN

Leakage caused by improper 

installation of drain hose or 

clogged drain hose.

Elbow Bracket

Tie Strap

Reinstall the drain hose.

Leakage caused by improper 

installation of water supply 

hose or using other brand 

supply hoses.

Reinstall the supply 

hose.

No power problem caused 

by loose connection of power 

cord or electrical outlet 

problem.

Reconnect the power 

cord or change the 

electrical outlet.

Service trips to deliver, pick 

up, install the product or 

for instruction on product 

use. The removal and 

reinstallation of the product.

Level

The warranty covers 

manufacturing 

defects only. Service 

resulting from improper 

Installation is not 

covered.

If all screws are not installed 

properly, it may cause 

excessive vibration (Pedestal 

model only).

Install 4 screws at each 

corner (Total 16EA).

Water hammering (banging) 

noise when washing machine 

is filling with water.

High 

pressure 

water

Hit

Loud
noise

Natural 

water flow

Sudden 

stopping 

water flow

Adjust the water 

pressure by turning 

down the water valve or 

water tap in the home.

Summary of Contents for F2J6TY(P)(0~9)W/S

















































Reviews: