22
DVD Micro Hi-Fi System
]
USER GUIDE
Troubleshooting
Symptom
Cause
Correction
No power
POWER
The power cord is not plugged in.
Plug in the power cord.
No sound
Some noise occurs.
RADIO
The function switch is not set to the Radio mode.
There are electronic devices near the player.
The antenna is positioned or connected poorly
Set the switch to the Radio mode.
Set the player far from the devices.
Check the anntena connection and adjust its position
The unit does not start play-
back
No picture
DVD/CD
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The disc is dirty.
The TV is not set to receive the video signal
Insert a playable disc.
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
Select the apporate video input model on the TV so the
picture from the unit appears on the TV
iPod does not work.
iPod
Check wheather the player is connected to the unit
Correctly .
Connect it to the unit correctly.
REMOTE CONTROL
The remote control is not pointed at the remote sensor of
the unit directly.
Point the remote control the remote sensor directly of
the unit.
The remote control does
not work properly.
The batteries in the remote control are exhausted.
Replace the batteries with new ones.
FB163-D0P_ENG_MK_9949 6/24/08 6:54 PM Page 22