A22
On Screen Display(OSD) Selection and Adjustment
Screen Adjustment
ARC
Auto-configure
Clock
Phase
Position
SCREEN
This function is suitable for analogue signal input only. This button is for the
automatic adjustment of the screen
Position
,
Clock
and
Phase
.
ARC
Auto-configure
Clock
Phase
Position
SCREEN
Full
Original
ARC
Auto-
Configure
This function is suitable for analogue signal input only. To minimize any vertical bars or
stripes visible on the screen background. The horizontal screen size will also change.
Clock
This function is suitable for analogue signal input only. To adjust the focus of the
display. This item allows you to remove any horizontal noise and clear or
sharpen the image of characters.
Phase
To select the image size of the screen.
SCREEN
ARC
Auto-configure
Clock
Phase
Position
H-Position
V-Position
Position
This function is suitable for analogue signal
input only. To adjust position of the screen.
Press the button to display the sub-
menu for position.
Left
Right
Moving the screen position horizontally.
Up
Down
Moving the screen position vertically.
ARC
Auto-configure
Clock
Phase
Position
SCREEN
Full
<
RGB
input only>
Note
When the Interlace Signal is inputted at the RGB source input level,
the
Auto-Configure
,
Clock
,
Phase
and
Position
menu can't be used.
<
HDMI,Component
input only>
1:1
Full
Full
Original
Summary of Contents for Flatron L245WP
Page 36: ...Digitally yours ...
Page 37: ...Regulatory information Regulatory information ...
