36
OPERATION
EN
NOTE
• If you select the washing programme,
you will be unable to select a spin only.
If this occurs, press
Power
button
twice to cycle the machine off and back
on.
Using Basic Options
You can customize the programmes by
using the following basic options:
Pre Wash
This option is recommended when
washing a heavily soiled load.
1
Press the
Power
button.
2
Select a washing programme.
3
Press and hold the
Intensive
button
for 3 seconds.
4
Press the
Start/Pause
button.
Add Item
You can use this option in order to add or
remove clothes after the washing
programme has started.
1
Press the
Power
button.
2
Select a washing programme.
3
Press the
Start/Pause
button.
4
Press the
Add Item
button as
necessary.
5
Open the door after it unlocks itself
and add or remove necessary
clothing items.
6
Close the door and press the
Start/
Pause
button.
NOTE
• For safety reasons, the door remains
locked when the water level or
temperature inside of the drum is
high. It is not possible to add clothes at
this time.
Delay End
You can set this function so that the
appliance starts automatically and
finishes after a specified time interval.
1
Press the
Power
button.
2
Select a washing programme.
3
Press the
Delay End
button as
necessary.
4
Press the
Start/Pause
button.
NOTE
• The delay time is the time to the end of
the programme, not the start. The
actual running time may vary due to
water temperature, clothes and other
factors.
• To cancel the function, the
Power
button should be pressed.
• Avoid using liquid detergent for this
function.