background image

27

OPERATION

EN

Programme Table

Washing Programme

Cotton

40 

 (Cold to 95 

)

Max. Load: Rating

Description Washes normally soiled clothes by combining various drum motions.

• Pressing the 

Start/Pause

 button without selecting a programme 

will cause the 

Cotton

 programme to begin immediately, using the 

default settings.

Eco 40-60

40 

 (40 

 to 60 

)

Max. Load: Rating

Description Washes normally soiled cotton clothes declared to be washable at 40 

 or 60 

.

TurboWash 59

40 

 (Cold to 60 

)

Max. Load 4 kg

Description With 4 water jets operating during the wash and rinse, this washing 

machine can wash a half load of lightly soiled clothes for 

approximately 59 minutes.

Mixed Fabric

40 

 (Cold to 60 

)

Max. Load 4 kg

Description Washes mixed fabrics simultaneously.

•  Use for various kind of fabrics except special garments (silk/

delicate, sports wear, dark clothes, wool, duvet/curtains).

Easy Care

40 

 (Cold to 60 

)

Max. Load 4 kg

Description Washes clothes that do not need ironing after washing.

•  Use for Polyamide, acrylic, polyester.

Allergy Care

60 

Max. Load 4 kg

Description Helps minimise substances that cause an allergic reaction.

•  Use for cotton, underwear, pillow covers, bed sheets, baby wear.

Baby Steam Care

60 

Max. Load 4 kg

Description Helps wash food stains from baby clothes.

Summary of Contents for FWV796 TSE Series





























































Reviews: