41
SMART FUNCTIONS
EN
In addition to the source code, all
referred license terms, warranty
disclaimers and copyright notices are
available for download.
LG Electronics will also provide open
source code to you on CD-ROM for a
charge covering the cost of performing
such distribution (such as the cost of
media, shipping, and handling) upon
email request to opensource@lge.com.
This offer is valid for a period of three
years after our last shipment of this
product. This offer is valid to anyone in
receipt of this information.
Smart Diagnosis
This feature is only available on models
with the
c
or
d
logo.
Use this feature to help you diagnose
and solve problems with your appliance.
NOTE
• For reasons not attributable to LGE’s
negligence, the service may not
operate due to external factors such
as, but not limited to, Wi-Fi
unavailability, Wi-Fi disconnection,
local app store policy, or app
unavailability.
• The feature may be subject to change
without prior notice and may have a
different form depending on where
you are located.
Using LG ThinQ to Diagnose
Issues
If you experience a problem with your
Wi-Fi equipped appliance, it can transmit
troubleshooting data to a smartphone
using the
LG ThinQ
application.
• Launch the
LG ThinQ
application and
select the
Smart Diagnosis
feature in
the menu. Follow the instructions
provided in the
LG ThinQ
application.
Using Audible Diagnosis to
Diagnose Issues
Follow the instructions below to use the
audible diagnosis method.
• Launch the
LG ThinQ
application and
select the
Smart Diagnosis
feature in
the menu. Follow the instructions for
audible diagnosis provided in the
LG
ThinQ
application.
1
Press the
Power
button to turn on
the appliance.
• Do not press any other buttons.
2
Place the mouthpiece of your
smartphone close to the
c
or
d
logo.
3
Press and hold the
Temp.
button for
3 seconds or longer while holding the
smartphone mouthpiece to the logo
until the data transfer is complete.
• Keep the smartphone in place until
the data transfer has finished. Time
remaining for data transfer is
displayed.
4
After the data transfer is complete,
the diagnosis will be displayed in the
application.
Max
.
10 mm
Max.
10 mm