LG GC-249SA, User Manual

4

INSTALLATION

Installing on a firm and flat surface

- Unstable installation is the main reason

   of vibration and noise.

- When the refrigerator is installed unstably,

   it can be stabilized by adjusting the

   adjustable foot.

- Slightly rising the front part of the

   refrigerator allow you to close the door

   very easily.

- When installed on a carpet or floor,please put

   a firm mat under the refrigerator otherwise

   the bottom part will change colour.

Keep an appropriate distance between 

the wall

- To ensure proper air circulation around the fridge-

freezer, please maintain sufficient space on both 

the sides as well As top and maintain at least 2 

inches (5 cm) from the rear wall.

- A smaller gap will restrict the operation of the

   refrigerator,which may result in an increase in

   power.

Installing in a less humid environment

- Do not install the refrigerator in a humid place

   or where water can easily be splashed.

- If the refrigerator is installed in a humid

  environment,it will go moldy.This will lower

  insulation property and cause electricity leakage

Avoid installing near heat and gas

- High temperature will lower the refrigeration

   and increase the power consumption.

- Installing near gas or smoke will change the

   surface colour of the refrigerator.

Keep distance

Slightly rise

the front part

Adjustable Foot

More than

5cm rear

Humidity

mat