14
INSTALLATION
1
Open the door and use the spanner
a
to
loosen the keeper nut by turning it to the left.
2
Use the spanner
b
to adjust the height by
turning the adjustment hinge pin to the left or
to the right.
CAUTION
• Do not adjust the height of the appliance door
more than 3 mm.
3
Use the spanner
a
to fasten the keeper nut by
turning it to the right.
NOTE
• Levelling the doors may not be possible when
the floor is not level, or is of weak or poor
construction.
• The refrigerator is heavy and should be installed
on a rigid, flat and solid surface.
• Some timber flooring may cause levelling
difficulties if it flexes excessively.
Door Alignment for Left Fridge
Door
Open the fridge door and use the spanner
c
to
rotate the door hinge bolt.
Door Alignment for Right Fridge
Door
Adjust the left fridge door first.
If the door is too low, lift the right door up and use
a pair of long nose pliers to insert C-Clips until both
doors are level.
Turning on the Power
Connecting the Appliance
After installing the appliance, connect the power
plug into the outlet socket.
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
global_main.book.book Page 14 Wednesday, January 6, 2021 8:35 AM
Summary of Contents for GC-Q22FTQKL
Page 37: ...Memo global_main book book Page 37 Wednesday January 6 2021 8 35 AM ...
Page 38: ...Memo global_main book book Page 38 Wednesday January 6 2021 8 35 AM ...
Page 39: ...Memo global_main book book Page 39 Wednesday January 6 2021 8 35 AM ...
Page 40: ...global_main book book Page 37 Wednesday January 6 2021 8 35 AM ...