![background image](http://html.mh-extra.com/html/lg/gc-w061-series/gc-w061-series_service-manual_222425039.webp)
9. Maintenance
9-1. Installation Instruction
(Leveling the product)
Two people are required in order to perform the leveling.
1. Tilt the product little bit to the back.
2. Level the product using
the leg adjustor. (Front
& Back, Left & Right,
one each)
(Avoid a heat and direct sunlight when installing the
product)
It may decrease the cooling power, resulting in a high
electric bill
(Ensuring heat radiation area)
The heat radiation grill emits heat. Please leave enough
space, more than 10cm for top, and 0.5cm for left and right
side, for heat radiation area.
(Install the product in a dry and well ventilated space)
It may form a mold, resulting in a high electric bill
9-2. Cleaning Instruction
Before cleaning, make sure that the power is unplugged and clean the wine shelf/the interior once a year.
1. Unplug the power.
2. Please use a soft cloth dampened with water or a detergent for exterior. If you are using a neutral detergent, wash it off
with a clean wet towel.
3. Do not use a polishing agent or a thinner.
4. Do not pour water in the interior or on the exterior.
5. Unclean door packing causes cool air leakage. Please clean it properly.
6. After the cleaning, place the parts in its original place. Plug in the power and set a desired temperature.
MAINTENANCE
- 39 -
Leg adjustor
Summary of Contents for GC-W061 series
