18
EN
3
After adjusting the difference in the height
of the appliance door, fasten the keeper nut
by rotating it clockwise.
To tighten the nut
If it is impossible to adjust the height of the
appliance door through the above method, level
the door according to the following guide.
[Method2]
1
When the appliance door is removed,
loosen the screw at the bottom of the lower
hinge.
2
Insert the appropriate number of ring sheets
between the lower hinge and the lower
bracket. (Total number of ring sheets: 4)
Ring sheet
Lower
hinge
Lower
bracket
3
Resecure the bracket screw after fitting the
ring sheets before refitting the door. When
the door is refitted, steps 1,2 and 3 of
adjusting the height of the door can then be
repeated.
CAUTION
•
When tilting the appliance backward to loosen
the screw at the bottom of the appliance, two
or more people should hold the handles at the
bottom and rear top side of the appliance.