background image

Advanced functions 

on your Video Recorder

Your Video recorder has some advanced operations with features you may find useful.

12

On screen display
(OSD)

This can be used to display the 
current time, tape counter, tape
remaining, day, month and year, day
of week, channel and operational
mode of your Video Recorder on your 
television screen. If a recording is 
taking place, the on screen displays 
will not be recorded onto tape.

1

Press 

OK

to show the 

OSD

.

2

Press 

OK

repeatedly to cycle

through the display options. 
The tape counter and amount of
tape left will appear if there is a
tape loaded. 

3

After 3 seconds the majority of the

OSD

will clear leaving only the

clock or tape counter and the
amount of tape left on the 
television screen.

4

Press 

OK

again to remove all

OSD’s

from the television screen.

To turn off the on screen displays
completely.

1

Press 

to enter the main menu. 

2

Select 

fOSD ON OFF

using 

or

then press 

OK

.

3

Select 

OFF

using 

or 

4

.

Press 

to save the setting.

Energy Save 

This feature allows you to conserve
energy. If you have programmed the
Video Recorder to record a future 
television programme this feature will
not work.

• Press 

on the Control Panel. All

indicators in the Display Panel will

be off.

To turn off Energy Save.

• Press the 

POWER

button 

(or

) on the Remote Control or

the Control Panel. 

Resetting the digital
tape counter

The tape counter displays the play 
or recording time elapsed in hours 
minutes and seconds. Press 

CLEAR

to reset the counter to 0:00:00.
When you press 

STOP

9

and press

REW

5

, the Video Recorder will stop

at 0:00:00, the point where you reset
the counter.

Lock (Child Lock)

You can turn off the buttons on the
Control Panel so that your Video
Recorder can only be operated using
the Remote Control.

1

Press the 

LOCK

button on the

Remote Control. 

SAFE

will appear

on the television screen. 

None of the buttons on the Control
Panel will work apart from 

STOP

9

and 

EJECT

/

If any other buttons on the front 
of the VCR are pressed, 

SAFE

will

appear on the television screen. To
unlock the Child Lock press the

LOCK

button again on the Remote

Control.

Wide Screen

For wide screen playback your Video
Recorder must be connected to your
television using a SCART cable.

1

Press 

to enter the main menu.

2

Use the 

or

buttons to select

16:9/4:3 

and press 

OK

.

i

AUTO
4:3
16:9

16:9

4:3

STOP
SP

 BBC1

 1.01.04 THU

12:00

SAFE

GC985/967NP1 NA4ULL-ENG  3/17/04  9:00 AM  Page 12

Summary of Contents for GC967NP1


















Reviews: