GHX-308A/616
HYBRID KEY TELEPHONE SYSTEM
Http://suryawardana.com
44
2.
A line that recalls the attendant will ring until answered or disconnected, or the attendant recall timer
expires. (Program Code: Flash 33)
3.
If still not answered, all available stations will receive recall for the duration of system hold recall timer until
answered or the line is dropped.
4.
When connected to a CO line and pressing a DSS button in an attempt to transfer the CO line, the CO line is
placed on exclusive hold regardless of Hold Preference.
5. A CO line put on hold cannot be retrieved with loop buttons.
HOT LINE
Description
This feature lets a station perform a pre-assigned feature when a station takes no action for Hot Line after going off-
hook. Hot Line feature can be programmed as one of the followings;
Activation time for Hot Line feature is determined by Hot Line Timer.
1) To activate a feature on flexible button as if pressed.
2) To seize a CO Line
3) To seize a CO Line Group
4) To call an another station
5) To dial a SPEED BIN number
Operation
Lift handset or press MON button, and wait for a predetermined period while hearing ICM dial tone. If the Hot Line
Timer is set to zero, Hot Line feature is activated.
Conditions
1. Any flexible button may be assigned as Hot Line feature. When lifting handset or pressing MON button, system
will act as if user presses the pre-selected button.
2. If the user selects an another feature prior to going off-hook, Hot Line feature is not activated.
3. SLT allows Hot Line feature except flexible button feature.
4. On going off-hook, both Dial Tone Timer and Hot Line Timer start. After the Hot Line Timer expires(no user
action), the Dial Tone Timer is continuous.
Programming
1. Hot Line Selection : Flash 53, Button 1-6.
1) Enter the station range
2) Select a button (one of button1-6 : hot line operation)
Button 1 : flexible button
Button 2 : CO line
Button 3 : CO group
Button 4 : sta. number
Button 5 : speed dial
Button 6 : delete hot line operation
2. Hot Line Timer : Flash 57
HUNT GROUPS
Description
The system can be arranged for up to eight hunt groups. Each hunt group can contain up to eight stations. When an
intercom or transferred CO line is directed to a pilot hunt group, the system will search sequentially for an idle station.
Upon finding an idle station within the group, it will ring at the idle station.
Feature Code
1. 710-717 : Hunt Group Number
Programming
