GHX-308A/616
HYBRID KEY TELEPHONE SYSTEM
Http://suryawardana.com
67
4. Enter 1 digit on the numeric keypad
5. Press HOLD button.
CALL PARK RECALL TIMER (FLASH 06)
A CO line connected to a station can be placed into one of six parking locations and can be retrieved from the
originating or any other station by dialing the Unpark code. A parked call will recall to the station that parked the call
when call park timer expires.
Parameters:
Determines the amount of time before a call placed in a call park location will recall the station placing the park.
Range:
000-255 seconds (000:No Recall)
Default:
180 seconds
Procedure:
1. Press FLASH button and dial 06.
2. On a display phone, you will see this display:
CALL PARK TIMER 000-255
180
4. Enter 3 digits on the numeric keypad.
5. Press HOLD button.
CONFERENCE TIMER (FLASH 07)
An unsupervised multi-line conference can continue until the expiration of the timer after the initiator of the conference
has exited the conference.
The outside caller can use the CO line he/she has accessed for outgoing call until the expiration of the timer.
Parameters:
Determines the amount of time an unsupervised mode(unsupervised multi-line conference) can be continued.
Range:
00-99 minutes
Default:
10 minutes
Procedure:
1. Press FLASH button and dial 07.
2. On a display phone, you will see this display:
CONFERENCE TIMER 00-99
10
3. Enter 2 digits on the numeric keypad.
4. Press HOLD button.
MESSAGE WAIT REMINDER TONE TIMER (FLASH 08)
A station can receive up to five independent messages. A station with a message waiting can be reminded at a timed
interval with a tone.
Parameters:
Determines the amount of time between repeated reminder tones to a telephone in a message waiting condition.
