LG GM-L273UQGM, Owner'S Manual

•

Do not block any of these vents 

with food packages.

   If the vents are blocked, airflow will be interruped and
   temperature and moisture problems may occur.

IMPORTANT:

Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must
thorougly clean both sections to eliminate odors.
To prevent odor transfer and drying out food, wrap or
cover foods tightly. (See the Food Storage Guide 
section for details.) 

Note:

 If you 

close the 
refrigerator 
forcefully, the 
freezer
door may open 
and close again 
due to pressure 
from internal air 
flow.
                                                                   

NEXT

1. Clean your refrigerator thoroughly and wipe off dust
    accumulated during shipping.
2. Install accessories such as ice cube bin, drawers, 
    shelves, etc., in their proper places. They are packed
    together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours 
    before putting food in it. Check the flow of cold air in 
    the freezer compartment to ensure proper cooling.
    Your refrigerator is now ready for use.

USING YOUR REFRIGERATOR 

ENSURING PROPER AIR CIRCULATION

In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. As shown 
in the illustration below, cool air enters through the 
refrigerator of the freezer section and moves up. Most of 
the air then flows through the freezer section vents and 
recirculates under the freezer floor. The rest of the air 
enters the refrigerator section through the top vent.

SETTING THE CONTROL

Display Off Mode
 

The display lights up and stays lit when the refrigerator 
is plugged in. You can change the display so that it lights 
up only when the door is opened. Press "FRZ.TEMP." 
and "ICE PLUS" buttons at the same time for 5 seconds. 
A tone will sound indicating that the display is Off. Once 
in Display Off mode, display only lights when door is 
opened or display button is pressed. Display turns off 30 
seconds after door is closed or by pressing display 
button a second time. Deactivate Display Off Mode in 
same manner as activation. 

REFRIGERATOR AND FREEZER 
CONTROLS:

Initially set the refrigerator and freezer controls 
to the recommended (middle) settings by 
pressing (REF.TEMP. Graphic) and (FRZ.TEMP. 
Graphic).

NOTE:

 When changing control settings, wait 

24 hours before making additional adjustments.
After 24 hours, adjust the compartments 
temperatures as desired. The more lit bars, the 
colder the refrigerator and freezer will be.

10