18
EN
Leveling and Door Alignment
Leveling
The appliance has two front leveling legs.
Adjust the legs to alter the tilt from front-to-back
or side-to side. If the appliance seems
unsteady, or the doors do not close easily,
adjust the appliance's tilt using the instructions
below:
1
Turn the leveling leg to the left to raise that
side of the appliance or to the right to lower
it. It may take several turns of the leveling
leg to adjust the tilt of the appliance.
NOTE
•
A flare nut wrench works best, but an open-
endwrench will suffice. Do not over-tighten.
2
Open both doors and check to make sure
that they close easily. If the doors do not
close easily, tilt the appliance slightly more
to the rear by turning both leveling legs to
the left. It may take several more turns, and
be sure to turn both leveling legs the same
amount.
Door Alignment
Both the left and right fridge doors have an
adjustable nut, located on the bottom hinge, to
raise and lower them to align properly.
If the space between the doors is uneven,
follow the instructions below to align the doors
evenly:
Use the wrench to turn the nut in the door hinge
to adjust the height. Turn the nut to the right to
raise the door or to the left to lower it.
