27
EN
Automatic Icemaker
The automatic icemaker can automatically make
12 cubes at a time, 50-110 pieces within a 24hr
period if conditions are favorable. This amount
may vary according to the environment
(ambient temperature around the appliance,
frequency of the door being opened, amount of
food stored in the appliance, etc.).
•
If the ice bin is completely filled with ice, ice
production will stop.
•
Sound of ice dropping into the ice bin is
normal.
•
The icemaker produces ice normally when
approximately 48 hours have passed after the
appliance is initially installed.
•
Discard ice produced for the first time without
using it.
•
While the automatic icemaker is operating, do
not touch it with your hands directly.
•
If ice cubes are stored in the ice bin for a long
period of time, they may clump together and
may not be separated easily. In such a case,
clean the ice bin before using it.
Turning the Automatic Icemaker
On or Off
To turn off the automatic icemaker, set the
icemaker switch to
OFF (O)
. To turn on the
automatic icemaker, set the switch to
ON (I)
.
Automatic Shut off Arm Power Switch
Keeping the power turned on to the icemaker
before the water line is connected can damage
the icemaker.
The icemaker water valve will buzz as the
icemaker fills with water. If the power switch is
in the
ON (I)
position, it will buzz even if it has
not yet been hooked up to water. To stop the
buzzing, move the power switch to
OFF (O)
.
NOTE
•
Do not keep the power turned on to the
icemaker before the water line is connected, it
can damage the icemaker.
Preparing for Vacation
Set the icemaker power switch to
OFF (O)
and
shut off the water supply to the appliance.
If the ambient temperature will drop below
freezing, have a qualified technician drain the
water supply system to prevent serious property
damage due to flooding caused by ruptured
water lines orconnections.
It can prevent serious property damage due to
flooding caused by ruptured water lines
orconnections.
NOTE
•
The ice bin should be emptied any time the
icemaker on/off switch is turned to the
OFF
(O)
position.