16
INSTALLATION
1
Open the door and use the spanner
a
to
loosen the keeper nut by turning it to the left.
2
Use the spanner
b
to adjust the height by
turning the adjustment hinge pin to the left or
to the right.
CAUTION
• Do not adjust the height of the appliance door
more than 3 mm.
3
Use the spanner
a
to fasten the keeper nut by
turning it to the right.
NOTE
• Levelling the doors may not be possible when
the floor is not level, or is of weak or poor
construction.
• The refrigerator is heavy and should be installed
on a rigid, flat and solid surface.
• Some timber flooring may cause levelling
difficulties if it flexes excessively.
Door Alignment for Left Fridge
Door
Open the fridge door and use the spanner
c
to
rotate the door hinge bolt.
Door Alignment for Right Fridge
Door
Adjust the left fridge door first.
If the door is too low, lift the right door up and use
a pair of long nose pliers to insert C-Clips until both
doors are level.
Turning on the Power
Connecting the Appliance
After installing the appliance, connect the power
plug into the outlet socket. Do not double up with
other appliances on the same outlet.
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
global_main.book.book Page 16 Thursday, April 7, 2022 2:51 PM
Summary of Contents for GMB844PZFG
Page 3: ...Before Calling for Service 33 global_main book book Page 3 Thursday April 7 2022 2 51 PM ...
Page 38: ...Memo global_main book book Page 38 Thursday April 7 2022 2 51 PM ...
Page 39: ...Memo global_main book book Page 39 Thursday April 7 2022 2 51 PM ...
Page 40: ...global_main book book Page 38 Thursday April 7 2022 2 51 PM ...