14
INSTALLATION
Removing the Door and
Drawer
If your entrance door is too narrow for the
appliance to pass through, remove the appliance
doors and pass the appliance laterally.
WARNING
• Disconnect the power cord, house fuse or circuit
breaker before installing, removing the doors, or
cleaning the appliance. Failure to follow these
instructions may result in death, fire or electric
shock.
Removing the Left Fridge Door
1
The water supply is connected to the upper
right part of the rear surface of the appliance.
Remove the ring in the joint area. Hold the
water supply connection and gently push the
collet
a
to detach the water supply line as
shown.
NOTE
• Disassembling/Assembling the Water Lines
b
Collet
c
Tube
d
Insert line
e
Clip
2
Remove the screw
f
from the hinge cover at
the top of the appliance. Lift the hook (not
visible), located at the bottom of the front side
of the cover
g
with a flat-head screwdriver.
3
Remove the cover and pull out the tube
h
.
Disconnect all wire harnesses
i
. Unscrew the
ground wire
j
.
NOTE
• The number of wire harnesses may vary
depending on the model.
4
Rotate the hinge lever
k
counterclockwise. Lift
the top hinge
l
free of the hinge lever latch
m
.
CAUTION
• When lifting the hinge free of the latch, be
careful that the door does not fall forward.