31
OPERATION
ENGLISH
appliance, frequency of the door being opened,
amount of food stored in the appliance, etc.).
a
Power Switch
b
Auto Shutoff (feeler arm)
Removing/Refitting the Ice
Storage Bin
The ice dispensing chute may become blocked with
frost if only crushed ice is used. Remove the frost
that accumulates by removing the ice bin and
clearing the passage with a rubber spatula.
Dispensing cubed ice periodically can also help
prevent frost buildup.
1
Gently pull the handle to open the ice
compartment.
2
To turn off the automatic icemaker, set the
icemaker switch to OFF ( O ).
3
To remove the in-door ice bin, grip the front
handle, slightly lift the lower part, and slowly
pull out the bin as shown.
4
Refit the in-door ice bin in the reverse
sequence of their removal.
CAUTION
• Do not touch the automatic icemaker’s
mechanical parts with your hand or any
mechanical implement. Doing so may cause
serious injury or damage to the appliance.
• Do not disassemble, repair or alter the
automatic icemaker. These tasks should only be
done by a service technician.
• Caution should be taken, as the automatic
icemaker operates continuously after the freezer
door is opened when the automatic icemaker
switch is set to the ON position.
• Keep children away from the dispenser.
• When refitting the ice bin, ensure that it is placed
correctly. If it is tilted or unlevel, it may not
continue to make ice due to sensor disruption.
Turning the Icemaker On/Off
To turn the automatic icemaker On/Off, press the
power switch on the icemaker to the ON ( | ) or OFF
(O) position.
Normal Sounds You May Hear
The icemaker water valve will buzz as the icemaker
fills with water. If the power switch is in the ON (|)
position, it will buzz even if it has not yet been
Summary of Contents for GML844PZKZ
