LG GN-B331SLZ, Owner'S Manual

9

THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE 
LATEST IN TECHNOLOGY. 
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION, 
AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.

INSTALLATION

1.

Select a good location.

After install stand base to refrigerator,

Place your refrigerator where it is easy to

attach screws (3)  at compressor base (2) 

use.

break through stand base body (1) to get good

2

.

Avoid placing the unit near heat sources, 

 stability. 

direct sunlight or moisture.

3. 

Air must circulate properly around your 

refrigerator to ensure efficient operation.

If your refrigerator is placed in a recessed area

in the wall, allow at least 10 inches (25 cm) or

greater clearance above the refrigerator and 2

inches (5 cm) or more from the wall. 

The refrigerator should be elevated 1 inch 

(2.5 cm) from the floor, especially if the floor is

carpeted.

2

4.To avoid vibrations, the unit must be level.

3

If required, adjust the leveling screws to

1

compensate for unevenness of the floor.

The front should be slightly higher than the

rear to aid in door closing.

1.  Stand base

Leveling screws can be turned easily by

2. Compressor base

tipping the cabinet slightly.

3. Screws (include on Owner’s Manual)

Turn the leveling screws clockwise

(         ) 

to

NEXT

raise the unit, counterclockwise

(        )

 to 

lower it (If stand base is not used).

1. Clean your refrigerator thoroughly and wipe

off all dust accumulated during shipping.

5. Don't install this appliance below 5

°

C

.

 It may 

cause the debasement of the refrigerator.

2. Install accessories such as ice cube box, etc.,

in their proper places. They are packed

6. When use stand base put refrigerator on  

together to prevent possible damage during

smooth/flat floor. 

shipment.

It is requiring smooth/flat floor to get good 

3. Connect the power supply cord (or plug) to

product standing.

the outlet. Don't double up with other

appliances on the same outlet.

4. Prior to storing food, leave your refrigerator 

on for 2 or 3 hours.