17
Care and Maintenance
1.
Unplug the power cord
from the outlet.
2.
Remove the room lamp lid
by taking down while
pulling its back projection.
3.
Remove the lamp by turning it counterclockwise and
replace new one.
4.
Assemble in reverse order of disassembly.
Replacement bulb must be the same specification as
original.
• Your fridge-freezer is designed with reversible doors, do
that they may open from either the left of right hand
side to suit your kitchen design.
Lamp Replacement
To Reverse the
Doors
• You must check the O-RING, which is made by rubber
and prevent electric spark.
• Don’t touch the lamp, in case of light on the long
time. Because it can be very hot.
However, When you want to reverse the doors, you
must be calling to service agent.
Reversing the doors is not covered by the warranty.
• Lamp capacity is MAX 30W.
• The lamp will remain “ON” for 7minutes if the door is
left open and then it is “OFF” for safety. (If you
reopen the door, the lamp is “On”.)
Note
w
w
Caution
w
w
Caution