LG GR-379TGL, Operation Manual

9

OPERATION

Water in food and air will frost on the inside wall and 
the surface of shelf evaporator when the refrigerator is 
operating in cooling mode. The frost with certain thick-

ness will affect the cooling effect, so it is necessary to 
regularly defrost your refrigerator in order to ensure 
efficient operation. Generally, the frost must be removed 
immediately when it exceeds 5mm.

-  Keep the drainage hole clean so that the defrosted water flows down to the evaporating tray 

   smoothly. Once jammed, you can remove the pin in the drainage hole and clean it. 

   Then put it back.

• 

Miracle Zone  

When the temperature in the Miracle Zone is set lower than 0    , it is normal 

  that frost and ice appears around the cooling room; When the temperature is set higher than 

  0    , the frost will gradually melt.

• 

Freezer compartment

    Manual defrost freezer

  Before defrosting - unplug the power plug, open the door and take out the food and drawers in the

  freezer, you can store the food in the refrigerator temporarily.

  Defrosting – Use the defrosting board to scrape off the frost on the 

  inside wall of the freezer and on   the surface of the shelf evaporator. 

  Wipe the defrosted water with a cloth and then dry.  

  After defrosting – turn on the power supply.

Drainage pipe

 Note:

Ice making

1. Fill the ice tray with water and place it on the ice cube box. 

2. To remove ice cubes, hold the knob of the tray and turn gently. 

    Then, ice cubes drop in the ice cube box. 

• 

Refrigerator Compartment

Defrost

  Defrosting takes place automatically in the refrigerator through 

  controlling the compressor on/off. The defrosted water on inside wall flows through the drainage

  hole above vegetable drawer to the evaporating tray which is located in the lower back side the 

  refrigerator and is evaporated automatically.

Defrosting board