24
Symptoms
Reason
Solution
Frost or condensation
has formed inside or
outside the product.
Did you open and close the
product door too often or is the
product door improperly closed?
•
Frosts or condensation can form if the
outside air penetrates inside the product.
Is the installation area humid?
•
Condensation can appear on the exterior
of the product if the installation area is too
humid or on the humid day such as the
rainy day. Wipe out the moisture with a
dry rag.
The product is
noisy and generates
abnormal sounds.
Is the product installed on a weak
floor or unstably installed?
•
Install the product on a solid and flat area.
Does the product rear touch the
wall?
•
Adjust the installation position to make
enough space around the product. (10
cm)
Are objects scattered behind the
product?
•
Remove the scattered objects from
behind the product.
Is there an object on top of the
product?
•
Remove the object on top of the product.
The side or front of the
product is warm.
Did you touch the part with the
heat releasing pipe installed?
•
The heat releasing pipe to prevent
condensation is installed on the front
and side of the product. You may feel it
particularly hot right after the product is
installed or during the summer. You can
be assured that this is not a problem and
use the product normally.
There is the moisture
around the product.
Is there water leakage around the
product?
•
Check if the water has leaked from a sink
or another place.
Is there water on the bottom of
the product?
•
Check if the water is from the thawed
frozen food or broken or dropped
container.
Summary of Contents for GR-B106ELNZ
