27
EN
Setting and Resetting Lock
This locks the buttons on the control panel.
•
Press and hold the
Lock
button for 3 seconds
. When the Lock function is set, all buttons are
locked.
•
When you press the
Lock
button for 3
seconds, the
Lock/Unlock
icon on the control
panel lights. The function is enabled and
disabled in turn each time you press the
button.
•
If you press a button other than lock when the
lock is set, the button will not function.
•
When you press a button other than lock
when the lock is set, the
Lock/Unlock
icon on
the control panel will flash 3 times.
•
To change a setting, first press the
Lock
button for three seconds to disable the
function.
Setting Wi-Fi
The
Wi-Fi
button, when used with the LG Smart
ThinQ application, allows the refrigerator to
connect to a home Wi-Fi network.
•
The
Wi-Fi
icon shows the status of the
refrigerator’s network connection. The icon
illuminates when the refrigerator is connected
to the Wi-Fi network.
•
Press and hold the
Wi-Fi
button for 3 seconds
to connect to the network. The icon blinks
while the connection is being made, then turns
on once the connection is successfully made.
Water and Ice Dispenser
You can dispense cubed ice, water and crushed
ice by pressing the respective button for the
desired mode.
•
When you press the Cubed, Water or Crushed
button on the control panel, the lamp on the
control panel will turn on and the desired
mode will be set. At this time, when you press
the dispenser lever, the selected appliance
(cubed ice, water and crushed ice) will be
dispensed.
•
The function is enabled and disabled in turn
each time you press the button on the control
panel.
CAUTION
•
Keep children away from the dispenser to
prevent children playing with or damaging the
controls.
•
Throw away the first few batches of ice (about
20 cubes and 7 cups of water). This is also
necessary if the appliance has not been used
for a long time.
