16
Installation
To move the refrigerator through a house door, it may be necessary to remove the
refrigerator door handles.
Handle removal
Place the handle on the door by aligning handle footprints to fit mounting fasteners
and tighten the set screws with a 2.5 mm (3/32") Allen wrench.
Handle
reinstallation
•
Handle appearance may vary from illustrations on this page.
NOTE
Loosen the set screws with a 2.5 mm (3/32")
Allen wrench and remove the handle.
•
If the handle mounting fasteners need to be tightened or removed, use a 1/4"
Allen wrench.
NOTE
•
If the handle mounting fasteners need to be tightened or removed use a 1/4" Allen
wrench
NOTE
Mounting
Fasteners
Set Screw
Allen Wrench
Mounting
Fasteners