CLEANING
20
Cleaning the Water Tank -
1. Remove the water tank as per the Disassembly
instructions. then remove the tank cover.
2. Clean the inside and outside of the water tank
with dishwashing detergent and rinse thoroughly
under warm running water. Dry the water with a
cloth.
3. Clean the inside and outside of the cover cap
with dishwashing detergent and rinse thoroughly
under warm running water. Dry the water with a
cloth.
WATER DISPENSER
Grille -
Wipe with a wet cloth, and dry with a dry cloth.
WATER
PUSH
Water Tank -
1. It is not necessary to remove the tank to fill it with water.
See page 17.
2. Disassembly
Lift the water tank, gripping it from the sides then from the
bottom of the tank.
3. Assembly
Refit the water tank by aligning it with the basket and slowly
lowering it into the correct position, ensuring that the valve is
pushed down snugly into the outlet hole of the door.
When removing the Water Tank, dispense all the
water from the dispenser first.
NOTE
NOTE
●
Before closing door, close the water cap to prevent water
from spilling out.
●
Do not use liquids containing sugar or carbonated drinks like
soda.
w
CAUTION
Use lukewarm water when cleaning.
Do not use anything other than water.
Summary of Contents for GR-W600GSL
Page 24: ......