background image

Caution!

The disc rotates at high speed in the drive unit.
Use of worn, damaged, or non-standard CD-ROM
discs can adversely affect the drive and cause the
disc to shatter or crush while in use.
Disc crush can only occur when you use a damaged 
CD-ROM disc in the drive. It is an extremely rare
occurrence, but there are steps which can be taken
to prevent it.

Always check your discs before inserting them
into the drive.

1. Take care not to use worn, cracked, damaged,

warped or poor quality CD-ROMs, as this may
cause damage to your drive.

2. Check the clear plastic on the center of the

disc, cracks here are the main cause of disc
crush.

3. Do not play CD-ROMs which are a non-standard

(I.e. non-circular)shape, such as heart shaped
discs, or discs in the shape of a business
card.

How can you keep your discs from becoming
damaged?

1. When not in use, remove discs from the drive.
2. Keep discs in the packaging supplied with

them and out of direct sunlight and away from
heat sources.

Excessive vibration or a sudden jolt to the drive 
during operation may cause a malfunction.
Avoid exposing the drive to sudden changes in
temperature as it may cause condensation to collect
inside the drive.

Copyright © 2004   

LG Electronics U.S.A. Inc.
1000 Sylvan Ave.
Englewood Cliffs NJ 07632 
U. S. A.
or http://www.lgeus.com

LG Electronics Canada Inc.
550 MATHESON Blvd. East
Mississauga. Ontario L4Z4G3 Canada

LG Electronics Deutschland GMBH
Jakob-Kaiser-Straße 12,
D-47877 Willich, Germany

LG Electronics U. K. Ltd.
LG House, 250 Bath Road,
Slough Berkshire SL1 4DX
United Kingdom

Goldstar France E.U.R.L
Paris Nord II 22, Avenue des
Nations-B.P.50372 VILLEPINTE
95945 ROISSY CDG CEDEX France 

LG Electronics Italia S.P.A.
Centro Direzione “IL Quadrate” Via 
Modigliani, 20090 Segrate (MI) Italy

LG Electronics España
Complejo Europa Empressaries
(Edif.Bruselas) Ctra. N-VI 28230 Las
Rozas Madrid Spain  

LG Electronics Australia Pty Ltd.
23, pike st Rydalmere NSW 2116 
or http://www.lge.com.au

©

2004 Made by

P/NO. 3828HM1055C

Worldwide support ; http://www.LGservice.com
Worldwide corporate site : http://www.LGE.com
USA support (backup site) : http://www.LGEservice.com
USA corporate site : http://www.LGEus.com

Summary of Contents for GSA-4120B















Reviews: