SMART DIAGNOSIS (Only for applied models)
Smart diagnosis function is...
Be aware!
Differences
of regional call qualities may have influence on the function.
If you
use a
home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be
successful if the call is made from a mobile phone with
poor cell reception
How to use the function
1. Open all the doors of the refrigerator.
2. Press the refrigerator door open detection
switch 5 times as in the figure to make the
light inside the
compartment
blink.
3. Place the phone near the speaker hole
in the top
right hand side door hinge
4. Do not take away the telephone while data is
being transmitted.
5. After the completion of the data transmission,
the consultant will explain the result of the
smart
diagnosis and
advise accordingly.
w
CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops.
Use
this function when calling the Customer Call Centre
and receive precise diagnosis when the
refrigerator
malfunctions or fails. Use it only
when advised by
the consultant and
not otherwise.
Ensure the microphone
of the
telephone is
toward the speaker hole.
During the data transmission for smart diagnosis,
hold the telephone 10cm away from the
speaker
hole and avoid any background noises
.
When the data transmission is completed,
the
refrigerator will be automatically
turned off and on
a few seconds later.
FOR INTERNAL CONTROLLER MODEL
26
Summary of Contents for GT-515BPL
Page 28: ...P No MFL68282852 ...
