INSTALLATION
1.
Select a good location.
Place your refrigerator where
it is easy to
use.
2.Avoid placing the unit near heat sources, direct sunlight or moisture.
3. Air must circulate properly around your refrigerator to ensure
efficient operation.
If your refrigerator is placed in a recessed area
in the wall, allow at least 10 inches (25 cm) or
greater clearance
above the refrigerator and 2
inches (5 cm) or more from the wall.
The refrigerator should be elevated 1 inch (2.5 cm) from the floor,
4.
5.
especially if the floor is
carpeted.
To avoid vibrations, the unit must be level.
If required, adjust the
leveling screws to
compensate for unevenness of the floor.
The
front should be slightly higher than the
rear to aid in door closing.
Leveling screws can be turned easily by
tipping the cabinet slightly.
Turn the leveling screws clockwise
( )
to
raise the unit,
counterclockwise
( )
to lower it.
Don't install this appliance below 5
°
C.
It may cause the debasement
of the refrigerator.
NEXT
1.
2.
3.
4.
Clean your refrigerator thoroughly and wipe
off all dust accumulated
during shipping.
Install accessories such as ice cube box, etc.,
in their proper places.
They are packed
together to prevent possible damage during
shipment.
Connect the power supply cord (or plug) to
the outlet. Don't double
up with other
appliances on the same outlet.
Prior to storing food, leave your refrigerator on for 2 or 3 hours.
Check the flow of cold air in the freezer
compartment to ensure
proper cooling.
Your refrigerator is now ready for use.
12
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE,
AND UTILIZES THE LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH
IT'S PERFORMANCE AND RELIABILITY.
BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS
BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION,
OPERATION AND MAINTENANCE, AND ALSO SUPPLIES SOME
USEFUL HINTS.
