SMART FUNCTION
(Only for applied models)
Smart diagnosis function is...
Use
this function when calling the Customer Call Centre
and receive precise diagnosis when the
refrigerator
malfunctions or fails. Use it only
when advised by
the consultant and
not otherwise.
Be aware!
Differences
of regional call qualities may have influence on the function.
If you
use a
home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be
successful if the call is made from a mobile phone with
poor cell reception
After the completion of the data transmission,
the consultant will explain the result of the
smart
diagnosis
and
advise accordingly.
When the data transmission is completed,
the
refrigerator will be automatically
turned off and on
a few
seconds later.
Do not take away the telephone while data is being transmitted.
During the data transmission for smart diagnosis,
hold the telephone 10cm away from the
speaker
hole
and avoid any background noises
.
Place the phone near the speaker hole
in the top
right hand side door hinge
Ensure the microphone
of the
telephone is
toward the speaker hole.
How to use the function
1.
2. T
urn knob to Middle notch.
3. Turn knob to Warm notch and keep that status
4. T urn knob to Cold notch within 3sec and keep that status
5. Turn knob to Middle notch within 3sec and keep that status
When SDS is input, buzzer let you know by ringing 4times.
0.2sec Off/ 0.2sec On 4times)
(Frequency of SDS Buzzer is 2000Hz,
After inputting SDS, SDS buzzer will ring.
• SDS can be input even Test Mode and Error status.
The transmission sound may be irritating.
Do not take away the telephone until the sound stops.
w
Warm Notch
(Min)
(Max)
(Mid)
(Mid)
Middle Notch
Cold Notch
Middle Notch
Open all the doors of the refrigerator.
First, call to the LG service center. Only use the Smart Diagnosis feature when instructed to do so by
the LG call center agent.
6.
7.
for 2se c.
for 2se c.
for 2se c.
8.
9.
CAUTION
2
4
