19
EN
Notes for Using the Control Panel
•
The control panel will turn on in any of the
following cases.
−
When the power is turned on
−
When a button is pressed
−
When the appliance door (fridge
compartment, freezer compartment) is
opened
•
The control panel will turn off automatically for
energy saving in any of the following cases.
−
When one minute has passed after turning
on the power
−
When no button operation is carried out for
20 seconds after a desired button is pressed
−
When 20 seconds has passed after the
appliance door (fridge compartment, freezer
compartment) is opened and closed
•
If there is any finger or skin contact to the
control panel while cleaning it, the button
function may operate.
Setting Wi-Fi (Optional)
The
Wi-Fi
button, when used with the LG
SmartThinQ application, allows the refrigerator
to connect to a home Wi-Fi network.
•
The
Wi-Fi
icon shows the status of the
refrigerator’s network connection. The icon
illuminates when the refrigerator is connected
to the Wi-Fi network.
•
Press and hold the
Wi-Fi
button for 3 seconds
to connect to the network. The icon blinks
while the connection is being made, then turns
on once the connection is successfully made.
Setting the Fridge Temperature
•
Press the
Fridge
button to adjust the
temperature. The temperature can be adjusted
from 0 °C to 6 °C.
Setting the Freezer Temperature
•
The temperature can be adjusted from level 1
to level 8. Depending on Climate, level 3 is
recommended.
•
To lower the temperature in the freezer, turn
the knob to the right and set to a higher
number.
•
To raise the temperature in the freezer, turn
the knob to the left and set to a smaller
number.
•
Setting the dial at 6~ 8 will maintain a low
temperature in the freezer. But, the
appliance’s cooling speed will be slowed
down.
NOTE
•
The actual inner temperature varies
depending on the food status, as the indicated
setting temperature is a target temperature,
not actual temperature within the appliance.
•
The default temperature setting may vary
depending on the appliance.
•
Wait until two or three hours have passed
after connecting the appliance to the outlet
before storing food in the appliance.
•
The appliance can automatically detect
problems during the operation.
•
If a problem is detected, the appliance may
not operate and an error code is displayed
even when any button is pressed.
•
When this occurs, do not turn off the power
and immediately contact the LG Electronics
customer information centre. If you turn off the
power, the repair technician from the LG
Electronics customer information centre may
have difficulty finding the problem.
Summary of Contents for GTF744BLPZD
