Getting Started
16
Getting Star
ted
1
How to fix anchors and screws
(For installation on concrete wall)
1. Drill holes in anchor locations with a drill bit of
Ø 6 mm to a depth of 40 mm to 45 mm.
2. Clean the drilled holes.
3. Insert the enclosed anchors for fixing the wall
mount into the holes. (Use a hammer when
inserting anchors.)
Wall mounting anchor
4. Push the wall mount support closely toward the
wall to match the hole locations.
5. Tighten screws for fixing the wall mount to the
holes. At this time, tighten the screws to a torque
12 kgf/cm
1
Wall mounting screw
Summary of Contents for GX
Page 47: ......