Getting Started
17
Getting Star
ted
1
y
When you mount the unit on the wall, fix it
carefully so as not to drop.
y
Do not install this product on a wall if it could
be exposed to oil or oil mist. This may damage
the product and cause it to fall.
y
Professional installers should read this manual
carefully to ensure proper installation.
y
Professional installers should forward this
manual to customers after installation and
encourage them to read and store it in a
convenient place for future reference.
y
After reading the installation manual, keep it
in a convenient place for future reference.
y
Ask a professional installer appointed by
the store for installation of the product.
Installation by someone other than a
professional installer is extremely dangerous
and may result in personal injury.
y
Do not install the product in an unstable
site that cannot withstand its weight. If the
installation site lacks sufficient rigidity, the
product may fall and cause personal injury.
y
Contact a professional installer appointed
by the store prior to moving or replacing the
product after installation. Installation is a
technical task and safety issues may arise if
an individual attempts to install or move the
product personally.
y
Do not hang on the product or subject it to
severe impact after installation. Doing so may
cause the product to fall and cause personal
injury.
y
When installing the product on a wall, do not
hang the power line or signal cables from
the back of the unit. This can damage the
cords, resulting in a fire, electrical shock or
malfunction of the product.
>
Caution
y
Install the product according to the
instructions in the installation manual.
Failure to install the product according to the
instructions in the installation manual can
result in serious personal injury or product
damage.
y
Be sure to have at least two people when
installing the product or adjusting the
product’s height. Attempting to perform
installation or adjustments personally may
result in personal injury or damage to the
product.
y
Make sure a wall is available prior to
proceeding with installation. Make use of
the anchors and screws provided with the
product. Use of any unauthorized anchors or
screws may not support the product's weight,
which poses safety risks.
y
When drilling in the wall for installation, be
sure to use drill bits and drills of the specified
diameter. Follow the instructions for the hole
depth. Drilling and installing the product in
ways other than specified in the installation
manual may result in an unstable installation
and potential safety issues.
y
Do not wipe the product with a wet towel
or use any heating equipment or humidifier
under the place where the product is installed.
Liquid water or vapor may enter the product
and excessive heat may cause fire, electric
shock, or malfunction.
y
Do not install the product near a fire sprinkler
or detector, a place where vibration or shock
may occur or near a highvoltage wire or
power source.
y
Unplug the product’s power cord from the
wall outlet before installing. Installing the
product while the power cord is plugged in
may result in electric shock or fire.
>
Caution
Summary of Contents for GX
Page 47: ......
