9
8
How to use
LED indication
Summary of button functions
Function
HBM-210
Status
Action
Function
HBM-210 Status
Action
Power on
Power off
Press the MFB for 4 seconds.
Power off
Power on
Press the MFB for at least 4 seconds.
Volume up
Talking
Briefly press the Volume Up button.
Volume down
Talking
Briefly press the Volume Down button.
Transferring a call
Talking
- Handset to Headset
Briefly press the MFB (must be paired)
- Headset to Handset
Press and hold the VOLUME UP
button for 5 seconds.
Answering a call
Ringing
Briefly press the MFB.
Ending a call
Talking
Briefly press the MFB.
Call waiting
Talking
Press the MFB for 1 second.
Last number redial
Idle
Press the MFB for 1 second.
Voice dialing
Idle
Briefly press MFB.
(handset must support)
Call reject
Ringing
Press the MFB for 1 second.
Pairing Mode(Manual) Power off
Press the MFB for 6 seconds.
Operating
Power on
The blue LED light flickers 4 times.
Power off
The blue LED light flickers 4 times
and then turns off.
Pairing mode
The blue LED light stays on.
Headset / handsfree
The blue LED light flickers
Profile connected
2 times every 5 seconds.
Call connected
The blue LED light flickers
2 times every 5 seconds.
Charging
Charging
The blue LED stays on.
Charging complete
LED turns off.
Voice dialing*
- Briefly press the
MFB to activate “Voice Command”.
You will get the best results if you record the voice dialing tag through
your Headset.
NOTE: If the handset does not support Voice Dialing, it is possible
that performing this action will activate Last Number redial.
Last number redial*
- Press and hold the
MFB for 1second to activate “Last Number
Redial”. The headset will beep, and call the last number dialed.
Ending a call
- Briefly press the
MFB.
Transferring a call*
- While on a call on your handset, briefly press the
MFB to transfer
the audio to the Headset.(headset and handset must be paired).
- And to transfer a call from the Headset to Handset, press and hold
the VOLUME UP button for 5seconds.
Call waiting*
- Answer a second call without hanging up the first call by pressing
the
MFB for 1 second. Press the MFB for 1 second to return to the
original call.
- Briefly press the
MFB to terminate both calls at once.
Call Reject*
- Activate Call Reject by pressing the
MFB for 1 second when the
handset rings.
*
It is possible to use these functions only when your handset supports
them. For further information about using these features, please
consult your handset's user manual.
