How to use
Change direction
Small Charging Cradle
Vehicle Power Adaptor
4
Description of parts
Headset
MFB
(Multi-Function Button)
Charging Port
LED
Indicator
USB Port
Left
Right
Volume Button
Mic
LED Indicator
Charging ontacts
Speaker
5
Charging
Low battery
Battery status Alert
Power on
- Slide the HBM-585 into the Small Charging Cradle or the Vehicle Power Adaptor.
- When the headset is placed into either charging device, the headset will turn off.
- While charging, the LED indicator will show a solid white light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.
NOTE: When the HBM-585 is removed from the charging device (Small Charging
Cradle of Vehicle Power Adaptor), it will automatically power ON. If the headset
has already been paired to your handset, it will automatically reconnect when
removed.
Pairing
Power off
- Press and hold the MFB for 3 seconds.
•
A shutdown tone will play, the Bluetooth link will be disconnected and the power
will turn off.
How to use
- A low battery tone will play once every 30 seconds.
- If the battery is not charged, the headset will turn off.
- By pressing and holding the VOLUME button for 3 seconds, you can check the battery
status of the HBM-585. The audible battery status alert will inform you of the battery
level. There are 3 levels of battery power:
1. Battery High
2. Battery Medium
3. Battery Low
- Press and hold the MFB for 3 seconds.
•
The power will turn on and a startup tone will play.
- The audible battery status alert will let you know the battery level.
- Before using the headset for the first time, it must be paired with a Bluetooth-
enabled handset.
- There are 2 pairing modes with the HBM-585.
1) Easy Pairing
•
Press and hold the MFB for 3 seconds to turn on the HBM-585.
•
The headset will enter auto-reconnect mode for 10 seconds.
(if your headset has already been paired with the handset, the headset will
automatically reconnect to the handset when the HBM-585 is powered on).
