6
7
ENG
ENG
Auto Reconnect
- When the HBM-905 turns off (accidentally or intentionally) while connected to a
handset, the Headset and handset will disconnect.
The Headset and handset will automatically reconnect when the HBM-905 is
turned back on.(as long as both devices are within the required range of 33ft.
or 10m).
Out of range
- When the HBM-905 and your handset are separated by a distance of 33 feet (10
meters) or more, the Headset and handset will disconnect. When the handset
and HBM-905 are brought back within the required distance, the HBM-905 will
automatically reconnect with the handset.
- If the Headset and handset do not automatically reconnect when they are back
within the required range, brie
fl
y press the CALL button on the HBM-905 to
reconnect manually.
NOTE: If The Headset does not connect with handset within 63 minutes, the
Headset will automatically turn off.
1) Easy Pairing
A. With the Power off, move the power switch to the ‘ON’ position
B. The headset will enter Auto-Reconnect mode for 10 seconds. (If your
headset has been previously paired to the handset, the headset will
automatically reconnect to the handset)
C. If the HBM-905 fails to reconnect to the phone (Speech: Failed to connect to
phone) after 10 seconds, the HBM-905 will automatically enter pairing mode.
D. When the headset enters Pairing Mode, the LED indicator will show a solid
white light. (Speech: Please pair phone now)
E. Using your handset,
fi
nd the Bluetooth Menu and “search for” or “add” new
devices.
F. Select “LG HBM-905” from the list of devices and pair it with your handset.
G. If you are asked for the Pass/PIN code during the pairing procedure, please
enter “0000” (4 Zeros).
H. Once pairing has completed successfully, you will hear a beep.
(Speech: Paired to phone successfully)
I. After pairing successfully, be sure to “Connect” to the LG HBM-905 using
your handsets controls.
(Speech: Connected to Phone) You will hear a short beep.
J. Some handsets will ask for permission to access the phones contact list.
If you would like to use Name Alert Function, please select OK or Allow
Access.
K. If you want to pair with a different device in the future, the headset must be
placed in Pairing Mode.
L. If the headset is in Pairing mode for three minutes without being connected
to a handset, the HBM-905 will automatically turn off.
2) Manual Pairing
A. With the Power off, press and hold the CALL button and move the power
switch to the ‘ON’ position at the same time.
B. When the headset enters Pairing Mode, the LED indicator will show a white
light. (Speech: Please pair phone now)
C. Continue from letter E above.
Volume control
- Brie
fl
y press the VOLUME button to adjust HBM-905 speaker volume
- There are eight levels of speaker volume.
- There are 14 levels while streaming audio via A2DP.
- The volume will increase one level, each time the volume button is pressed.
When the headset reaches the maximum volume level, the next press of the
button will return the headset to the lowest volume level.
NOTE: The HBM-905 has the Automatic Volume Control that can
automatically adjust HBM-905 volume according to the environmental
noise level.
How to use
How to use
