8
9
ENG
ENG
Multipoint
The LG HBM-905 is capable of having two handsets connected to the Headset
at the same time. This will give you the freedom of having only one Headset to
operate both your handsets.
Multipoint Connect
- Pair the Headset with one of your Bluetooth-enabled handsets.(per the pairing
instructions on pages 6-7).
- Turn off the Headset.
- With the power off hold the CALL button and move the PWR switch to ON
position, to enter Manual Pairing mode.
- Now, pair and connect the Headset with your other Bluetooth-enabled handset.
(This will be your Primary handset).
- Once this handset is paired and connected, go back and connect the
fi
rst paired
handset to Headset. (This will be your Secondary handset).
NOTE: When the HBM-905 is connected to two handsets at the same time
(Multipoint), the Headset calling functions will work with the most
recently used handset.
Calling
Answering a call
- With an incoming call, brie
fl
y press the CALL button to answer. When the call is
connected, you will hear a beep.
- With name alert active, the headset will ring once and then announce who is calling.
- If name alert is not active, Headset will only ring.
Making a call
- If you make a call from the handset, the call will (subject to phone settings)
automatically transfer to the Headset. If the call is not automatically transferred, you
can manually transfer the call by brie
fl
y pressing the CALL button on the HBM-905
(Headset and handset must be paired).
Voice dialing*
- Brie
fl
y press the CALL button to activate “Voice Command”. You will get the best
results if you record the voice dialing tag through your Headset.
NOTE: If the handset does not support Voice Dialing, it is possible that
performing this action will activate Last Number redial.
Last number redial*
- Press and hold the CALL button for 1second to activate “Last Number Redial”.
The Headset will beep, and call the last number dialed.
Ending a call
- Brie
fl
y press the CALL button.
Transferring a call*
- While on a call on your handset, brie
fl
y press the CALL button to transfer the audio
to the Headset.(Headset and handset must be paired).
- And to transfer a call from the Headset to handset, press and hold VOLUME button
for 3 seconds.
Call waiting*
- Answer a second call without hanging up the
fi
rst call by pressing the CALL button
for 1second. Press the CALL button for 1second to return to the original call.
- Brie
fl
y press the CALL button to terminate the active call or both calls at once.
(subject to handset’s support)
Call Reject*
- Activate Call Reject by pressing the CALL button for 1second when the handset rings.
* It is possible to use these functions only when your handset supports them.
For further information about using these features, please consult your handset’s
user manual.
How to use
How to use
