8
ENGLISH
Battery Charging and Alerts
Open the
Charging port cover and connect the charger to the Charging port.
Indicator Lamp
Red
Purple
Blue
Battery Status
Charging
80%
Completed
Slide and hold the
Volume jog switch in the volume down ( ) direction for one second to check the
Indicator lamp and battery level by voice.
Battery Status
Sufficient
Normal
Insufficient
Indicator Lamp
Blue flashes
three times
Purple flashes
three times
Red flashes
three times
Vibration Alert Settings
2 sec
The vibration alert is automatically set to the ON when you turn on
the power.
To activate or deactivate the vibration setting, slide and hold the
Volume jog switch in the volume up ( ) direction for two seconds.
NOTE: When vibration is turned off, the HBS-780 will not vibrate
when receiving an incoming call.
Out of Range
If the device connected to the product is out of effective communication range (33 feet/10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically
reconnects to the device. If the device is not automatically reconnected, press the
Call button on the
product to connect to it manually.
If a device that is not in use goes out of communication range when multiple devices are connected,
a voice message will indicate that the connection is lost. In this case, the automatic reconnection
function is not supported.
Summary of Contents for HBS-780
Page 38: ......
