4
Hooking up the unit
a
Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
b
Plug the power cord into the power source.
Audio In connection
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
audio). If your TV has only
one output for audio (mono),
connect it to the left (white)
audio jack on the unit.
SCART connection
Connect the TO TV jack on
the unit and your TV using
the SCART cable.
FM connection
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
Video Out connection
Connect the MONITOR jack on
the unit to the corresponding
input jack on your TV using a
Video cable.
Component Video connection
Connect the COMPONENT/
VIDEO OUTPUT jacks on
the unit to the corresponding
input jacks on your TV using
a Y PB PR cable.
* If your TV accepts
progressive format signals,
you must use this
connection and set
[Progressive Scan] in
[Display] setup to [On]
(See page 8).
HT253DD-D0_BGBRLL_ENG_8854 5/14/09 4:17 PM Page 4