LG HW306 Series, Owner'S Manual

4

SAFETY PRECAUTIONS

 •If you will not use the product for a prolonged period of time, disconnect the power 

plug from the receptacle and fully drain water from the water tank.

This may cause fire, shock or smell.

 •When operating, only supply water through the upper part of the product.

This may cause fire, shock, injury or leak.

 •Never insert metallic articles such as pins, needles or foreign substances into the 

outlet or the filter section.

This may cause fire or injury.

 •Do not move the product while the product is operating or immediately after 

turning on.

This may cause fire, shock or product failure.

 •Always disconnect the power cable from the receptacle when filling the water tank.

This may cause shock or product failure.

 CAUTION

 •Do not use the product as a ventilation fan or oven range hood in the kitchen.

This may cause product failure.

 •Do not use the product near curtains or drapes.

This may cause product failure.

 •Do not use the product while using indoor fumigation insecticides.

This may cause injury.

 •Use clean tap water at a temperature of 40 ˚C or lower.

This may cause deformation/discoloration.

 •Do not use the product for removing toxic gases such as carbon dioxide.

This may cause product failure.

 •Do not use the product in the vicinity of home appliances such as microwave ovens 

or television sets that emit large quantities of electrostatic fields.

This may cause product failure.

 •Do not put obstacles next to the outlet of the product.

This may cause product failure.

 •Use a lint-free soft cloth for cleaning the water tank.

This may cause product failure.

 •Use clean tap water at a temperature lower than 40 ˚C for cleaning the moisture 

disk and water tank.

This may cause deformation/discoloration, noise or product failure.

 •Do not use strong detergent such as a solvent for cleaning the product. Use a soft 

lint-free cloth for cleaning.

This may cause product failure or deformation/discoloration.

 •Avoid damaging the power plug by forcibly bending, twisting, pulling or heating the 

plug, or inserting the plug in a tight space.

This may cause fire or shock.

 •Never put inflammable substances into the product.

This may cause fire or product failures.