6
BEFORE & AFTER INSTALLATION
Before Installation
Please carefully read this manual before
installation.
•
Solar module installation should be per-
formed by an authorized installer for the
safety and maintenance of the system.
•
All installation instructions should be
clearly understood before attempting ins-
tallation.
•
Do not twist, pull, or scratch the cable
attached to the solar module.
•
Do not touch the solar module with bare
hands. It may result in a burn or injury.
•
Do not drop the solar module and cause
an excessive load on the solar module.
•
Do not disassemble the solar module.
•
After installation or repair, check whether
the solar module operates properly or not.
•
In case the currently used solar module or
the parts applied to the solar module have
been replaced, check whether the chan-
ged solar module is properly operated or
not. The newly replaced solar module and
its parts must be the same solar module
(module name) and parts with the current
solar module.
•
Please contact the local office to confirm
the regulations and to obtain permission.
•
Do not let anyone approach the solar mo-
dule who has little knowledge of solar mo-
dules or on the measures to take when
solar modules are damaged in order to
avoid the risk of injury or electrical shock.
•
Do not locate the solar module horizon-
tally, as this may cause dirt or white efflo-
rescence (glass deformation).
•
Modules produce voltage even when not
connected to an electrical circuit or load.
•
Modules are intended for outdoors, land
based applications only. Modules are not
intended for indoor use or application on
moving vehicles of any kind.
•
Reflection from external environments
such as snow, water or other surfaces can
increase the power generated by the
module.
•
Industry standard rated specifications are
made at conditions of 1000 W/m
2
irradi-
ance and 25°C solar cell temperature.
Colder temperatures can substantially in-
crease voltage and power.
•
Keep the solar module and system away
from children when installing.
•
Keep the module packed in the carton
until the time of installation.
BEFORE & AFTER INSTALLATION
Summary of Contents for K)-G3/-A3/-B3 series
Page 2: ......
