LG KI-14U30, Owner'S Manual

Setting up TV stations             

Contents

Up to 59 TV stations can be stored in this set by programme
numbers (1 to 59). Once you have preset the stations, you will be
able to use the PR+/- or NUMBER buttons to scan the stations you
programmed.
Stations can be tuned using automatic or manual modes.

Please ensure that your external VCR, Satellite Receiver or Cable
TV Decoder are connected, switched on and were applicable have
their test signals switched on before tuning the set. It may however
be necessary to Manually tune and then Fine tune the set to
receive signals from these sources.

Auto programme tuning

All stations that can be received are stored by this method. It is
recommended that you use auto programme during installation of
this set.

1. Repeatedly press the MENU button to select MENU 4.
2. Press the PR+/- button to select 

Auto programme

.

3. Press the OK button to begin auto programming.

Option :
Dual standard models, the band automatically changes

VHF-L

 ¡æ 

VHF-H

 ¡æ 

UHF

.

When auto programming is completed, the station stored into
programme number 1 will appear on the screen. 

To stop auto programming, press the OK or MENU button. The
active programme at that time will be displayed.

Note : Some undesired stations may be stored, such as noisy or
unclear signals from distant transmitters. You can easily skip these
stations by entering 

Programme edit

mode.

9

1 2 3

MENU

PR

PR

4 5 6

7 8 9

0

OK

MENU 4

∫Programme∫preset

∫∫∫Manual∫programme∫
∫∫∫Auto∫programme∫∫∫
∫∫∫Programme∫edit
∫∫

∫Use: PR+_,OK
∫End:MENU