LG KI-14U30, Owner'S Manual

Other functions                  

Contents

Picture adjustment

You can adjust picture contrast, brightness, colour intensity,
sharpness and tint (NTSC AV only) to the levels you prefer.

1. Press the PICTURE button or the MENU button on the front

panel. The 

Picture set

mode will appear.

2. Press the PR+/- button to select the desired picture item.
3. Press the VOL+/- button to make appropriate adjustments on

the sub menu.

4. Wait for about a second after adjusting. The 

Picture set

mode

will appear again.

5. Repeat steps 2 to 4 to adjust another picture item.
6. Press the OK or PICTURE button. The on screen menu will

disappear.

If you want to select the standard picture, select 

Standard On

with the PR+/- and VOL+/- button in the 

Picture set

mode.

The 

Standard

picture is programmed for good picture repro-

duction at the factory and cannot be changed.

Colour system setting

You can adjust the colour system. Under normal circumstances,
select 

AUTO

. If necessary (if input signal is weak), change the

colour system by using the instructions below. 

1. Press the SYSTEM button. The 

System

mode will appear.

2. Repeatedly press the SYSTEM button to select the correct

system.

Note : 

NTSC PB 

is for playing back NTSC tape only. You cannot

record NTSC signals.

19

PICTURE

PR

PR

VOL VOL

SYSTEM

OK

∫∫∫∫∫∫

System AUTO

∫ PAL
∫∫∫∫∫∫∫∫ NTSC∫PB
∫∫∫∫∫∫∫∫

∫∫∫∫∫∫
∫Picture∫ set
∫

∫∫ Standard On
∫∫ Contrast 50
∫∫ Brightness 32
∫∫ Colour 32
∫∫ Sharpness 32

∫Use: PR+_,VOL+_
∫End:OK