A15
Press the button to reset immediately.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
SETUP
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
POWER
INDICATOR
Restore all factory default settings except
"LANGUAGE."
S E T U P
S E T U P
Use this function to set the power
indicator on the front side of the monitor
to
ON
or
OFF
.
If you set
OFF
, it will go off.
If you set
ON
at any time, the power
indicator will automatically be turned on.
MENU
: Exit
: Adjust
: Adjust
SET
: Select another
sub-menu
-
+
ARC
To select the image size of the screen.
FULL
ORIGINAL
Resolution Screen ratio
1280x1024
1152x864
1024x768
800x600
640x480
720x480
5 : 4
4 : 3
4 : 3
4 : 3
4 : 3
3 : 2
* ORIGINAL :
Depending on the input video signal ratio,
it is automatically changed to an optimized screen
ratio. (The 1280X1024 input signal is changed
to 5:4 ratio and 1024X768 to 4:3.)
❈
The input signal which the ARC does not support the
'ORIGINAL'
is the following.
- The 22 inch monitor is 720x400,1280x768,1360x768,1680x1050
Summary of Contents for L225WS
Page 24: ...Digitally yours ...
