Listening to radio stations
1
Press
SOURCE (SRC
on the remote control) to select the tuner.
2
Press
BAND
repeatedly to select a band.
The indicator lights up in the following order. FM1
t
FM2
t
FM3
t
MW(AM)
3
Auto Search :
Press
I
I
/
i
i
(
b
/
B
on the remote control).
When a station is received, searching stops.
Manual Search :
Press and hold
I
I
/
i
i
(
b
/
B
on the remote control) until “MANUAL”
appears, and then press it repeatedly.
The frequencies move up or down step by step.
Storing and recalling broadcast frequencies
You can easily store up to 6 broadcast frequencies for later recall at the touch of a button.
1
Press
BAND
to select desired band you want to store.
2
Select the desired frequency.
3
Press one of preset buttons 1~6 and hold until the beep sound.
The number you have pressed will be displayed in the preset number indicator and then
remain lit. The selected radio station frequency has been stored in memory.
4
Repeat steps 1~3 to preset other stations.
The next time, you press the same preset button, the radio station frequency is recalled
from the memory.
Note
•
Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored
in the memory.
•
When a new station is stored in the preset station button, the previously preset station is
automatically erased.
Auto search memory
This function lets you automatically store the 6 strongest broadcast frequencies.
1
Press
AS
.
The six strongest broadcast frequencies will be stored under preset buttons 1~6 in the
order of their signal strength.
2
To cancel, press
AS
.
To scan the preset stations
Press
PS
. Each preset station appears. To cancel, press
PS
.
To tune in the preset stations
Press
BAND
to select the desired band and press the desired preset buttons 1~6.
The preset station of the preset buttons 1~6 is displayed and the preset station is received.
15
Radio operation
