9
6.4 Enter device PIN CODE(PASSWORD)
1. The desired bluetooth device requests to enter the
pincode of it.
(The Bluetooth Passcode is a 1 to 16 character-long
numeric code. )
2. Enter the pincode and send to headset by pressing
OK.
3. When the connection has been established, the device
shows connected to followed by the device's name
and address.
( Note that you can have only one active connection at
a time. )
4. If the connection is failed, you can try to connect
device again.
5. Once the headset and LDP-7000BTU have
successfully paired, you are ready to place and receive
calls. (see section 9, 10.)
[LDP-7024LD]
[LDP-7024D]
