31
OPERATION
ENGLISH
Options
Select the desired cycle button and then select the
options for that cycle.
Dual Zone
This option automatically sets the spray intensity to
soft for the upper spray arm and strong for the lower
spray arm. Place heavily soiled dishes like plates and
bowls in the lower rack and lightly soiled dishes like
cups and small plates in the upper rack to get the
best results.
Half Load
This option washes intensively by selecting the upper
or lower racks. For small loads, use just the upper
or lower rack to save energy and time. By pressing
the
Half Load
button, the settings , and the
cancellation of the Half Load option are available.
Energy Saver
This option saves energy by reducing the wash
and rinse temperatures. Wash time is increased to
maintain wash performance. Do not use this cycle
with heavily soiled dishes.
Steam
This option adds steam at the start of the cycle to
improve wash performance.
If the Steam option is added to a cycle, the indicator
stays lit at the end of the cycle if the dishes
were properly sanitized (on some models). If the
dishwasher could not properly sanitize the dishes
because the Steam option was not selected, the
cycle was interrupted or the water could not be
heated to the required temperature, the indicator will
not light up at the end of the cycle. Open and close
the door or press
POWER
to turn the indicator off.
NOTE
•
This high temperature rinse sanitizes dishes and
glassware in accordance with the NSF/ANSI
Standard 184 for residential dishwashers. Certified
residential dishwashers are not intended for use in
licensed food establishments. Only sanitizing cycles
have been designed to meet the requirements for
soil removal and sanitization efficacy. There is no
intention, either directly or indirectly, that all cycles
on a certified machine have passed the sanitization
performance test.
High Temp
Raises the main wash temperature to improve
cleaning.
Extra Dry
Select the
Extra Dry
option for better drying
performance. This option adds extra drying time to
the cycle and raises the heated rinse temperature.
•
When the rinse aid is empty, the
Extra Dry
option is
selected automatically.
Night Dry
Dishes are often left in the dishwasher overnight after
the cycle ends. This can result in the steam inside
the tub condensing on dishes, leaving them wet. The
Night Dry option runs the ventilation fan periodically
to help vent the steam from the tub.
•
Press and hold
Extra Dry
for three seconds to
activate.
•
The
Night Dry
option is selected by default on all
cycles for which it is available, except the Normal
cycle.
•
To add the
Night Dry
option to the Normal cycle,
press and hold
Extra Dry
for 3 seconds
Delay Start
The Delay Start feature delays the start of a selected
cycle. Each time the
Delay Start
button is pressed,
the delay time increases by an hour. The delay
time can be set from 1 to 12 hours, in one-hour
increments.
Summary of Contents for LDT7808SS
