Do not touch the glass surface or
frame of the solar module after in
stallation of the module. It may re
sult in injury or death.
Heavy objects must be kept off of
the solar module.
Do not stand on or step on the m
odule. Do not drop the module. F
ailure to comply may result in pro
duct damage, product failure or b
odily injury.
Do not scratch the coating
surface of the frame.
Scratches may decrease the total
solar output due to corrosion of th
e frame.
Do not artificially concentrate s
unlight on the solar module sur
face. Failure to comply may re
sult in product damage or failur
e.
Do not apply a shock to the j
unction box of the module or
pull the cable. Do not remove the
labels attached to the module.
Failure to comply may result in
damage of the product.
If the installing modules on curved surface, (e. g. arch ty
pe), as shown in the below picture, do not forcefully mo
dify the module in the installation when connecting it wi
th the structure. Only install the module in the place wh
ere the structure for the panels has been properly set u
p. An improper structure may cause deformation of the
panels. Panels may also be damaged by unapproved in
stallation methods such as the use of a
Module
Installing structure
(bent type)
Module Installi
ng structure (Stral
ght type)
Product D
eformation
Occurrence
of space
Partial shadow must be removed
from solar module because it can
cause severe problems of solar
module.
Holes in the frame or glass of
the module may decrease the
strength of the frame or break the
glass.
Installation during rain, heavy wi
nd or snowy day may result in b
odily injury or death.
crane.
4
