5 TM220 Ver. 1.0
CHAPTER 2. BASIC FUNCTIONS
Turning the Phone On and Off
<Turning the Terminal On>
1.Connect the terminal to the charged battery or the external power supply.
2.Press the [END/PWR] key for about 0.5 seconds until a red light appears on
the upper side of the terminal.
< Turning the Terminal Off >
1. Press the [END/PWR] key until the ending animation appears on the LCD,
and then stop pressing the key.
2. If an antenna is stretched, push it in for safety.
Making a Call
<Method1> Entering the Entire Phone Number
1. If the terminal is turned off, turn it on.
2. Enter the phone number.
(Enter the area code, if necessary.)
3. Press the [SEND] key.
- If the terminal is locked on, enter the password to unlock the terminal.
Then, attempt the call again.
- If the call is not connected, “Call Failed” signal will be indicated on the
LCD.
4. Press the [END] key.
<Method2> Using Phone Book Entry
1. Enter the phone entry number, and press the [SEND]
key or press the related phone entry number for some
time. Then, the call will be attempted.
e.g.) Press the [2] key for some time, then call will be
connected to the phone number stored in the Entry #2.