2. PERFORMANCE
- 25 -
Copyright © 2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
10) WLAN 802.11g transmit / receive Electrical Characteristics(Conducted)
Parameter
Spec.
Transmit Frequency
2400 MHz ~ 2483.5 MHz ( CH1~CH13 )
Tx Power Level
≤ 20dBm under (Europe), ≤ 30dBm under (USA)
Frequency Tolerance
within ±25 PPM
Chip clock Frequency
Tolerance
within ±25 PPM
Spectrum Mask
≤ -20 @ ±11MHz offset (9Mhz ~ 11MHz)
≤ -28 @ ±20MHz offset (11MHz ~ 20Mhz)
≤ -40 @ ±30MHz offset (20MHz ~ 30Mhz)\
Transmitter constellation error
(rms EVM)
≤ -5dB@6Mbps, ≤ -8dB@9Mbps, ≤ -10dB@12Mbps,
≤ -13dB@18Mbps, ≤ -16dB@24Mbps, ≤ -19dB@36Mbps,
≤ -22dB@48Mbps, ≤ -25dB@54Mbps
Spurious Emissions
< -36 dBm @ 30MHz ~ 1GHz
< -30 dBm above @ 1GHz ~ 12.75GHz
< -47 dBm @ 1.8GHz ~ 1.9GHz
< -47 dBm @ 5.15GHz ~ 5.3GHz
Rx Min input Sensitivity
PER ≤ 10%
-82dBm@6Mbps, -81dBm@9Mbps, -79dBm@12Mbps
-77dBm@18Mbps, -74dBm@24Mbps, -70dBm@36Mbps
-66dBm@48Mbps, -65dBm@54Mbps
Rx Max input Sensitivity
≥ -20dBm(6,9,12,18,24,36,48,54Mbps) @ PER ≤ 10%
Rx Adjacent Channel
Rejection
PER ≤ 10%,
ACR ≥ 16dB@6Mbps, ACR ≥ 15dB@9Mbps,
ACR ≥ 13dB@12Mbps, ACR ≥ 11dB@18Mbps,
ACR ≥ 8dB@24Mbps, ACR ≥ 4dB@36Mbps
ACR ≥ 0dB@48Mbps, ACR ≥ -1dB@54Mbps
* ACR shall be measured by setting the desired signal’s strength 3 dB above the
rate-dependent
sensitivity specified in min input sensitivity